home sitemap about Pero our addresses fairs, events contact/questionnaire

deutsch français česky po polsku по-русски

PERO AG
Advanced metal cleaning
Hunnenstr. 18
D - 86343 Königsbrunn
Tel +49 - 8231 - 60 11 - 0
Fax +49 - 8231 - 60 11 - 810

PERO Rotimat 2, Rotimat 2K,

We have the economicalcleaning solution you are looking for

Cleaning ³ (by the power of three)

PERO washing units offer unrivalled cleaning performance. Thanks to the innovative design and the use of the most efficient cleaning medium, PERO units combine economic and environmentally-friendly operation with excellent efficiency.
PERO machines meet or even exceed the legal requirements as regards health and safety and guarantee safe operation.
All PERO units are delivered ready for operation after having passed a test run under production conditions.

	Rotimat 2	Rotimat 2K
washing agent	detergent	hydrocarbon
diameter basket	1000 mm	1000 mm
working height	650 mm	650 mm
useable weight	max. 300 kg	max. 300 kg
loading height	720 mm	720 mm
rotating basket, driven	1 min^-1	1 min^-1
vol. wash tank	450 ltr.	450 ltr.
wash pump	700 ltr./min	400 ltr./min
pump pressure	2,5 bar	1,5 bar
heating	18 kW	-
total connect load	24 kW	5 kW
outside dimensions length mm width mm height mm	2.900 1.200 2.250	2.500 1.150 2.250
transport weight of unit	1000 kg	1000 kg

Clean with 450 litres

The excellent cleaning performance of the Rotimat 2 is primarily based on the high volumetric flow with which the workpieces are treated. The heating output and tank volume are dimensioned for uniform good cleaning dynamics.

The parts are thereby washed with alkaline or neutral aqueous solutions. The cleaning agent is sprayed through a system of flat and round nozzles at high pressure onto the parts to be cleaned.All sides of the parts are thereby treated, so that dirt, chips and cooling lubricant are effectively removed. The machine is suitable for the cleaning of large single parts such as tools, as well as metal, nonmetal or plastic bulk components. The turn table is driven by a maintenance-free friction wheel.
The vertical up-and-over cover allows for unobstructed access to the processing chamber. The machine can thus be easily charged from the front, e.g. from a hall trolley, or from above with suitable lifting gear. The jog mode control of the turn table facilitates charging, and is particularly useful for the placing of heavy parts on the table.

Standard model

Electrically heated washing machine
Temperature control with thermostat, dry-run protection
Turn table driven by electric motor
Preselection of washing and drying times
Centrifugal fan extracting vapour through an extractor duct (to be provided by operator)
Filter in pump circuit
Safety switch prevents spraying when cover is opened

Optional equipment

Digital weekly timer for the automatic switching on of the heating prior to shift start
Automatic fresh water supply system
Connection for PERO bath maintenance units
Connection for manual jet-cleaning system

The product information and technical data on our websites give a quick survey over our range of products.
They are no request for buying. The information given on our websites is not sufficient as a decision for investment. Before deciding for a PERO installation, please contact one of our technical consultants to verify the suitability for your specific needs. In most cases test cycles with sample parts in one of our showrooms are necessary.

Our websites support your search for a suitable machine. We are not liable for correct or complete contents, nor for the correctness of examples for application, opinions or other information you might find.
We reserve the right to modify or not our websites at any time.

home sitemap about Pero our addresses fairs, events mail