home   sitemap   about Pero   our addresses   fairs, events    contact/questionnaire   

deutsch    français    česky    po polsku    по-русски    


At this internet-site you will find

Why use methylene chloride ?

PERO vacuum cleaning systems, type V0 ... V5 are suitable for operation with: Perchloroethylene, Trichloroethylene, methylene chloride, hydrocarbons and modified alcohols


 

Why use methylene chloride ?

Methylene chloride (di-chlorine methan) is a superlative cleaning medium with a high efficiency and following advandages:

  • low operating temperature
  • better cleaning effect as per-chlorine ethylene and tri-chlorine ethylene
  • removes adherent contaminations as well
  • Methylene chloride serves as a solvent for grease, oil, mineral oil, wax, resin, celluloid ester etc.

    Methylene chloride disappeared from the field of vision of some users due to the introduction of the 2.BImS (= German emission regulations).
    It is still approved as a cleaning medium, as well as a propellant component for sprays and cosmetic products.

    Following characteristics effect the advantages of methylene chloride:

  • faster evaporization than other solvents (boiling point only 42°C)
  • methylene chloride doesn't destroy the ozone layer. Low rate of formation of smog, climate warming and acid rain.
  • Methylenchlorid wird in der Umwelt biologisch abgebaut.
  • Due to high volatility methylene chloride requires a high grade of care for application and handling. There is no relevancy to this point due to the fact that PERO cleaning systems are operating emission free.


    PERO vacuum cleaning systems, type V0 ... V5 are suitable for operation with methylene chloride

    Sorry,
    this part of our internet-site is not yet ready
     

    Our Hybrid Cleaning Systems V0 ... V5 can also be operated with methylene chloride (MC).



    The product information and technical data on our websites give a quick survey over our range of products.
    They are no request for buying. The information given on our websites is not sufficient as a decision for investment. Before deciding for a PERO installation, please contact one of our technical consultants to verify the suitability for your specific needs. In most cases test cycles with sample parts in one of our showrooms are necessary.

    Our websites support your search for a suitable machine. We are not liable for correct or complete contents, nor for the correctness of examples for application, opinions or other information you might find.
    We reserve the right to modify or not our websites at any time.


    home   sitemap   about Pero   our addresses   fairs, events    mail   

    deutsch    français    česky    po polsku    по-русски    

    imprint