home sitemap about Pero our addresses fairs, events contact/questionnaire

deutsch français česky po polsku по-русски

PERO AG
Advanced metal cleaning
Hunnenstr. 18
D - 86343 Königsbrunn
Tel +49 - 8231 - 60 11 - 0
Fax +49 - 8231 - 60 11 - 810

Solvent Vapor
Degreasers Aqueous
Spray Washers Single Chamber
Cleaning Systems Belt Washers
Tunnel Washers

Product SurveyTunnel Washers

Tunnel washersare used for large quantities and belt production.

Local cleaning and manual feeding is also easily possible.

Tunnel washers are operated with non-polluting aqueous cleaning agents.

All indications of weights, throughput capacities and dimensions are appr. values.
Technical improvements are reserved.

Compact Tunnel WashersKDA 10 - KDA 50

photo of the machinery KDA35WST
Tunnel Washer KDA 35 WST

	KDA 10	KDA 20	KDA 35	KDA 50
working passage width mm height mm	100 250	200 300	350 300	500 300
max. size of parts l x w x h	200 x 100 x 250 mm	400¹⁾ x 200 x 300 mm	400¹⁾ x 350 x 300 mm	400¹⁾ x 500 x 300 mm
¹⁾For longer parts we can add a neutral zone of 500 mm length between the individual washing chambers.
outside dimensions length mm ²⁾ width mm height mm	1500-3300 1150 1990	2100-5500 1500 2320	2100-5500 1650 2320	2100-5500 1900 2320
²⁾ The length of the tunnel depends on the number of work chambers.
vol. wash tank	220 ltr.	300 ltr.	410 ltr.	515 ltr.

Tunnel Washers of type DLA

For larger work pieces our well-proven belt tunnel washing system is available. It can be supplied with a standard working passage of 800 x 500 mm.

photo of the machinery DLA 80 WSST
Tunnel Washer DLA 80 WSST

	DLA 80 W ^*	DLA 80 WST ^*	DLA 80 WSST ^*
*Explanation: W=washing, S=rinsing or washing, T=drying,N=neutral zone
working passage width mm height mm	800 500	800 500	800 500
max. size of parts l x w x h	800¹⁾ x 800 x 500 mm	800¹⁾ x 800 x 500 mm	800¹⁾ x 800 x 500 mm
¹⁾For longer parts we can add a neutral zone of 500 mm length between the individual washing chambers.
outside dimensions length mm ²⁾ width mm height mm	4500 2660 2850	8500 2660 2850	11000 2660 2850
²⁾The length of the tunnel depends on the number of work chambers.
vol. wash tank	1100 ltr.	1100-1400 ltr.	1100-1400 ltr.

Special Tunnel Washers for Shafts of typeWDA 75 and WDA 100

This type of tunnel washer is suitable for cleaning and degreasing shafts.

photo of the machinery WDA
Special Tunnel Washers for Shafts WDA

	WDA 75 WT	WDA 100 WT	WDA 100 WST
length of shaft	250 - 750 mm	250 - 1000 mm	250 - 1000 mm
diameter of shaft	10 - 50 mm	10 - 50 mm	10 - 50 mm
outside dimensions length mm ¹⁾ width mm height mm	3400 2200 2300	3400 2500 2300	5250 2500 2300
1)The length of the tunnel depends on the number of work chambers.

Special Tunnel Washers for Steel and Plastic Boxes

Plastic boxes are often extremely ribbed for reasons of stability. Most of them have a number of very narrow and deep hollow spaces, which do not allow the water to drain off or be dried completely. The only remedy is to rotate and empty them after each washing cycle.

	Tunnel Washer for Boxes
max. size of box l x w x h	min 600x400x200 mm max 660x480x300 mm
vol. wash tank	515 ltr.
spraying capacity	ca. 300 ltr./min
outside dimensions length mm ¹⁾ width mm height mm	9300 2000 2960
width with oil separator	2810
1)The length of the tunnel depends on the number of work chambers.

home sitemap about Pero our addresses fairs, events mail

deutsch français česky po polsku по-русски

imprint