home   sitemap   about Pero   our addresses   fairs, events    contact/questionnaire   

deutsch    français    česky    po polsku    по-русски    


Solvent Vapor
Degreasers Aqueous
Spray Washers Single Chamber
Cleaning Systems Belt Washers
Tunnel Washers

Product Survey Single Chamber Cleaning Systems

Our ROBOMAT single-chamber cleaning systems have almost been established as industrial standard for washing and cleaning.
Our ROTIMAT rotary-basket cleaning systems are mainly used for intermediate cleaning in production units.

All indications of weights, throughput capacities and dimensions are appr. values.
Technical improvements are reserved.

Single Chamber Cleaning System ROBOMAT

photo of the machinery Robomat 2 This proven and solid single-chamber cleaning system is mainly used for intensive cleaning of larger machine parts. Mechanical and soldered parts, punching or drawing or casting tools, also automobile and tank motors or ship's turbines are often cleaned in Robomats before storage or processing.

PERO cleaning systems of the ROBOMAT series are available in three different options

  • ROBOMAT for washing agents
  • ROBOMAT/U for washing agents, switch-over from washing to rinsing
  • ROBOMAT/K for cold cleaning agents
  • ROBOMAT size 1 - 6 7 - 1121 - 48
    working length mm1000-35001200-52002100-4800
    working height mm7009601450
    working width mm850 10401250
    side view RobomatRobomat Robomat
    Robomat /URobomat /URobomat /U
    loading capacity kg 700-20001000-30002000-3500
    pump capacity ltr./min600-1500950-20001000-2000

    The spraying device of the Robomat moves around the parts in circles. The actual working height or width depends on the geometry of the parts. Please click on the layout of the side view.


    Aqueous Rotary Basket Washing SystemsROTIMAT 1 and ROTIMAT 2

    photo of the machinery Rotimat 1Rotimat 1                               Rotimat 2Rotimat 2

      Rotimat 1 Rotimat 1ARotimat 1KRotimat 2 Rotimat 2K
    washing agent detergent detergent hydrocarbon detergent hydrocarbon
    outside dimensions
      length mm
      width mm
      height mm
    1.060
    1.100
    2.250
    1.390
    1.100
    2.250
    1.650
    1.100
    2.250
    2.800
    1.200
    2.250
    2.500
    1.150
    2.250
    loading height720 mm720 mm720 mm720 mm720 mm
    diameter basket 1000 mm 1000 mm 1000 mm 1000 mm 1000 mm
    working height 650 mm 650 mm 650 mm 650 mm 650 mm
    useable weightmax. 300 kg max. 300 kg max. 300 kg max. 300 kg max. 300 kg
    rotating basket, driven no yes optionalyes yes
    vol. wash tank 150 ltr. 150 ltr. 200 ltr. 450 ltr. 450 ltr.
    wash pump300 ltr./min 300 ltr./min 300 ltr./min 600 ltr./min 400 ltr./min
    pump pressure2,5 bar 2,5 bar 1,5 bar 2,5 bar 1,5 bar


    Wash Table for Small Parts

    for sprayable cold cleaning agent (hydrocarbons, minimum flash point above 55 °C).

    Wash table for small partsWash table for small parts (version with rear wall)

     Wash table for small parts
    washing agent cold cleaning agents
    outside dimensions 1300x550x900 mm
    loading height900 mm
    possible
       basket sizes
    500x400x200 mm
    working height 200 mm



    The product information and technical data on our websites give a quick survey over our range of products.
    They are no request for buying. The information given on our websites is not sufficient as a decision for investment. Before deciding for a PERO installation, please contact one of our technical consultants to verify the suitability for your specific needs. In most cases test cycles with sample parts in one of our showrooms are necessary.

    Our websites support your search for a suitable machine. We are not liable for correct or complete contents, nor for the correctness of examples for application, opinions or other information you might find.
    We reserve the right to modify or not our websites at any time.


    home   sitemap   about Pero   our addresses   fairs, events    mail   

    deutsch    français    česky    po polsku    по-русски    

    imprint